Seed Tube Guard Scraper

OEM seed tube guards typically wear down to 1/2″ by the end of an average season. The majority of the wear occurs early in the season. As the furrow becomes narrower, planting depth decreases and becomes more erratic. The opener disks should be adjusted deeper to compensate. Increased compaction and glazing of the furrow side walls may result.

Plugging between opener disks and gauge wheels can be a serious problem. Worn gauge wheel arm pivots are the main cause by allowing the tires to pull away from the opener disks. Badly worn seed tube guards allow the disks to flex inward and contribute to the problem, which is reduced with the Copperhead Ag Seed Tube Guard.

The nearly constant width and the flat bottom of the furrow produced by the Copperhead Ag guards will allow the seed to more consistently reach a uniform depth. The flat bottom will not be compacted or glazed which will result in more uniform emergence.

XP row units attach differently.  There are holes in every other type of row-unit for mounting.  The XP has a pivot mount.