Heel sweeps

The heel sweep is designed to fit over the top of the chisel plow shank.  The design also includes flat wings for effective weed slicing, low draft and high residue retention.  A chisel plow spike bolts on the front in combination with the sweep.  This bolt pattern allows the chisel to mount below the sweep plain, which allows for excellent penetration and depth control, by using this combination you can chisel and cultivate at the same time.  Chisel plow points can be mixed and matched to achieve the desired penetration and wear life. Here are some optional chisel plow points:  N237910, N237890, N130190 and AN231796.  The sweep should be mounted so that the wings of the sweep are level when the chisel plow frame is level. The sweep has slotted holes so that leveling adjustments can be made when the sweep is mounted.

Heel sweeps

·        3-in. wide, Tru-Width™ wing maintains a constant working width for long wear

·        Made from 1080 high-carbon steel, for long life and superior performance

·        Heat-treated for added strength and durability

Major markets for heel sweeps

·        Kansas

·        Colorado

·        Oklahoma

·        Texas

·        Nebraska

Part

number

Description

Pkg.

qty.

Min.

order

qty.

Low-crown sweep

John Deere low-crown sweeps lineup – the 9-, 10-, and 16-in.

Features

·        Shallow crown and flat wings

·        Excellent residue flow

·        Minimal ridging

·        Good soil conservation

·        The recommended shank-mounting angle is 47 degrees

These Tru-Width™ low-crown sweeps are designed for minimum residue disturbance. They give excellent performance in field finishing applications where smooth, even tillage is desired.

These low-crown sweeps can be mounted on a number of tillage tools: 

·        960, 980, and 2200 Field Cultivators

·        722 and 726 Mulch Finishers

·        856 Row-Crop Cultivators

·        Competitive field cultivators that have a 47-degree shank angle

Part

number

Description

Pkg.

qty.

Twisted slash points

The twisted slash points are designed to fit most modern minimum-till coulter chisels on the market today. These points are the one-piece replacements for the soil-saver point and soil-saver moldboard assembly. They are offered in both regular and hard-faced versions. However, both the soil-saver point and moldboard will still be available.

Twisted slash point 

Single piece slash point (will replace three-piece assembly)

Recommended hardware:

Bolt size: 1/2-in.

Hole spacing: 2-1/4-in.

·        Made from 1/2x4-in. 1080 high-carbon steel

·        The twisted slash point is offered with hard facing for an extended life

The soil-saver point is a replacement point for the moldboard twist assembly.

Soil-saver point

Replacement points for moldboard twist assembly

Bolt size: 1/2-in. clipped head bolt, PMCH1500 and 1/2-in. hex nut, 12H301

Hole spacing: N/A

·        Made from 1/2x4-in. 1080 high-carbon steel

·        Hard-faced cutting edge for extended life

·        The soil saver point is offered in regular and hard-faced versions

The soil-saver moldboard is a replacement for the moldboard assembly.

Soil-saver moldboard

Replacement moldboards for moldboard assembly

Bolt size: 1/2-in. clipped head

Hole spacing: 2-1/4-in.

·        Made from 1/2x4-in. 1080 high-carbon steel

·        In most conditions, a customer will be able to run a soil-saver moldboard for at least 2 to 3 soil saver points before changing or reversing the soil saver moldboard

Part

number

Description

Pkg. qty.

Min.

order

qty.

Part number

Description

Pkg.

qty.

⁷/₈-in. heavy-duty chisel point

This ⁷/₈-in. heavy-duty chisel point gives you twice the life of a conventional point. This is a substantial improvement over our current 5/8-in chisel plow point offered today.  You now have a better/best selling option to your customers.  These points excel in heavy and hard to penetrate ground.

7/8-in. heavy-duty chisel point

Recommended hardware:

19H2644

·        Made from 1080 high-carbon steel for long life and superior performance

·        Reversible spikes have upset points for increased wear and longer life

·        Retains original shape and stays sharp even after considerable use

·        The bolt holes are countersunk for bolt head extended life and chisel retention

·        The hex-head bolt design allows the point and bolt to adhere to the shank

⁷/₈-in. chrome chisel point

The ⁷/₈-in. chrome chisel point has a chrome coat exterior for increased wear and longer life. Even after considerable use in the toughest fields, this chisel point will retain its original shape and stay sharp.

7/8-in. chrome chisel point

Recommended hardware:

19H2644

·        Made from 1080 high-carbon steel for long life and superior performance

·        The bolt holes are countersunk for extended life

·        Improved geometry of bolt holes for better shank fit up

·        The large chrome point is positioned for soil to flow over the bolt heads for extended life

·        The chrome point is geometrically designed to slice and part soil for low draft and effective soil movement

·        The weld that holds the point on to the base of the chisel plow point is covered so that it may reduce the potential for erosion of the weld and point breakage

·        Will handle abrasive soils with ease and provide extended wear

Part

number

Description

Pkg.

qty.

Min.

order

qty.